Equipment
Our company also undertakes the commissioning of complex painting systems, from planning to execution. We have many references. If you are interested in this offer, call us or contact us by e-mail.
The latest powder coating Mach-Jet Gun with the CRN 457 control module and the integrated DPCS system gives the powder coating an optimal charge. The operator can easily select the painting programs suitable for different shaped workpieces, which ensures perfect quality while sparingly handling the paint powder.
The integrated controls on the gun save time, because the settings can be changed while painting.
Accessible – The operating module is located at the front of the handcart, its viewing angle ensures perfect readability.
Universal – The vibrating table can accept any container currently on the market.
Efficient – the powerful powder pump ensures homogeneous flow and easy transfer of the powder in the tank, thus increasing the efficiency of the process.
User-friendly - Easily adjustable air flow control: vibration, flow
Optimized - the angle of the tank allows the suction pipe to reach the lowest point of the tank. Vibration prevents dust build-up. The vibration only works when the gun is in use.
Easier handling – The reduced size equipment with four castors is easy to move.
Specifications:
Gun (supplied with 1.2m cable and 1.2m hose)
| Weight on operator | 660 g |
| Lenght | 305 mm |
| Powder flow up to | 24 kg/h |
| Powder hose | 6 m (diameter 11 mm) |
CRN 457 module
| Max voltage | 80 kV (+ 5 kV-9kV) |
| Max current | 110 µA (+/-10µA) |
| Air pressure | 7 bar +/- 1 bar |
| Max air consumption | 15 NM3/h |
| Power supply | 90/270 V – 50/60 Hz |
| Protection | IP 20 |
Eszköz
| Dimensions L x W x H | 101 x 44 x 65 cm |
| Approximate weight | 40 kg |
The equipment complies with the following standards: ATEX, CE, FM.
The new spray heads ensure homogeneous spreading.
In every area:
For all types of powder:
